American Arcade Push Button Credit / Coin / Exit / Power / Pause / Menu / Select

Here we are with a little twist on our classic American style type button. These American Happ style arcade buttons come with 7 different designs / images printed on the button: Credit / Coin / Exit / Power / Pause / Menu / Select.

These designs are perfect in case we need buttons for special functions such as adding credits, adding an exit button, turning on / off our arcade cabinet, Bartop or similar arcade project. We highly recommend this product if you are going to use emulators not only for Arcade systems, but also classic console emulators. These buttons also come in handy if we are going to use a PC or a Raspberry Pi for our Arcade project.

Thanks to its 62mm length, the American Arcade Push Button is suitable for installation on both metal and wooden control panels. With a concave profile and a soft-medium hardness microswitch, the button has a diameter of 28mm and is easy to install thanks to the screwbutton nut included.

The feel and quality of this button can be substantially improved if you also buy the 4.8mm Zippy Microswitches or the Cherry D44X Microswitches as these microswitches are much softer than the default ones.

Mounting Information

To install the American Arcade Push Button Credit / Exit / Coin / Power, you'll need 4.8mm wiring as that is the width of the button terminals. If you purchase one of the encoders we sell at Arcade Express, be sure to select the option with 4.8mm wide terminals. You can also purchase extra 4.8mm wiring for the Zero Delay or the Xin Mo from the links below: Zero Delay / Xin Mo.

Features

• American concave style button
• Creative and practical designs
• Microswitch and Thread included
• 28mm diameter
• 62mm in length
• Suitable for wood and metal panels