Sanwa OBSJ-24 Metalic Japanese Arcade Button

The Japanese Sanwa OBSJ Snap-in button is a very special product. This stylish and colorful push button has a metallic evaporative paint coating that prevents the button from peeling or scratching. This range of Sanwa metal type button is perfect for Fighsticks and custom arcade designs.

The Sanwa OBSJ 24 is based on the OBSF model, which is the standard pushbutton used in control panels such as Madcatz, Qanba and Hori fightsticks. They are also perfect for making modifications to Mayflash control panels and for installing them in metal control panels or Controls Panels that do not have much space under the base.

With a diameter of 24mm the Sanwa OBSJ-24 is soft to the touch and a very silent button. This is a very fast action button as the springs inside it are super short and sensitive. Just a little pressure is needed to activate them. Top of the line, the OSBJ-24 is a button that will last you a lifetime.

This push button is ideal for mounting on metal or thin wooden control panels. The panel needs to be up to 3.7 mm of thickness and with a 24mm mounting hole. The Sanwa OBSJ-24 is super easy to install as it has a a plastic clip on each side that locks the button when mounted in the control panel. We also sell the version of the OBSJ button with a 30mm diameter. The OBSJ-30 is normally used as an action push button while the OBSJ-24 is used as a start, select, credit or special function button.

If you want to install Sanwa buttons on thicker panels, we recommend using the OBSN-24 variant with screw. Besides having a screw that makes its installation easier in wooden panels, it's got a longer length.

Mounting Information

To install the Sanwa OBSJ-30 push Button, you'll need 2.8mm wiring as that is the width of the button terminals. If you purchase one of the encoders we sell at Arcade Express, be sure to select the option with 2.8mm wide terminals. You can also purchase extra 2.8mm wiring for the Zero Delay or the Xin Mo from the links below: Zero Delay / Xin Mo.

Features

• Product made in Japan
• Metallic finish 
• Anti-scratch and anti-peeling protection
• High quality design and manufacture 
• Ultra-sensitive microswitches model SW-68
• Built-in 2.8mm microswitches
• Soft to the touch and silent
• Large selection of colours
• Ideal for wood and metal panels
• 24mm diameter