1 & 2 Player Iluminated LED Translucent Arcade Button

Arcade Express presents these elegant LED-lit buttons that will give that different touch to your arcade cabinet. Look no further, these are the definitive push buttons you need to light up your Arcade!

These beautiful push buttons have Translucent plastic trims which makes the lighting stand out, especially if you connect it to 12V instead of 5V. The buttons have a diameter of 28mm but can be installed on panels that have holes between 28mm and 30mm without problem since the trim reaches 33mm in diameter.

This type of illuminated push button comes in handy if you're thinking of building a Bartop or Arcade Cabinet with a specific theme. For example, if you have an arcade machine with the Mortal Kombat theme in mind, you could put in red illuminated push buttons as they would combine perfectly with the arts. If your project is from another game such as Ghosts 'n Goblins you could, in that case install the buttons in green colour. As you can see, mounting these kinds of push buttons on your Arcade Cabinet can give you a lot to play with.

These illuminated LED push buttons are sold in pairs. You will both a 1 and 2 player button for the price you see. To light the buttons you will need to connect them to 5V or 12V. We recommend using a 12V power source as this will make the buttons brighter. Unlike the illuminated chrome push buttons, these push buttons have Translucent plastic trims that give them a brighter touch.

The LED inside the button is compatible with both 5V and 12v. In case the LED stops working it is very easy to replace it. At our store you can find loose LED lamps which you can use as replacement.

In order to light up the pushbutton, you will need a 5V or 12V power source. We recommend that you either directly get it from the Arcade Machine power supply or from one of the 5V pins on the Xin Mo encoder, or the specific Zero Delay LED encoders to light up the LEDs. These Zero Delays are available for 1 or 2 players which are also available at our store. 

Mounting Information

To install the LED Arcade push button, you'll need 4.8mm wiring as that is the width of the button action terminals and 6.3mm LED wiring as that is the width of the LED fastons. If you purchase one our interfaces, be sure to select the option with 6.8mm wide terminals wire. You can also purchase extra 6.3mm cables for the Zero Delay LED or the Xin Mo from the links below: Zero Delay / Xin Mo.

Features

• Illuminated traslucid button
• Microswitch and LEDs included
• 4.8mm microswitch
• For 28mm-30mm diameter holes
• Length 35 mm
• Metal / Wood panels
• 12V / 5V voltage
• Easy installation