Zero Delay LED 3 pin + GND cables extra set

Set of 4 extra cables which will be very helpful when connecting to the Zero delay LED encoders available at Arcade Express. These cables can be used both to illuminate your LED buttons and to connect the action push buttons.

Each cable is approximately 33cm long and have a 3pin connector on one end and regular 2.8mm / 6.3mm female faston connector on the other end. The Red cable is where is voltage and has a 2.8-6.3mm wide faston (Depending on what the customer chooses). The yellow wire is ground and has a 2.8-4.8mm faston that is connected to the microswitch of the action push button. There is also black cable that has 2 connectors, which is another ground for the LED and it is 2.8-6.3mm wide and finally, another connector with 2.8-4.8mm wide fastons that is also connected to the microswitch action push button. 

This is a great product in case we want to increase the number of LED push buttons of our Arcade/Bartop/Pinball Machine. It is compatible with many all our LED push buttons.

Features

• Set of 4 x cables for connecting illuminated buttons
• Compatible with the 3pin Zero Delay LED boards
• 2.8mm/6.3mm fastons
• Each cable has connectors for LEDs and action push buttons
• Quality insulated cable with transparent rubber bands to avoid electric issues
• Cables with a length of approximately 33cm