VGA to SCART 15Khz Molex + Audio ArcadeVGA Cable

Arcade VGA to SCART cable to connect a PC / Rasbperry Pi which outputs 15Khz CGA video to a CRT TV.

This is the best option to adapt an Arcade Cabinet along with a PC / Rasbperry Pi with MAME type emulators connected to a CRT TV. We will get a Pixel Perfect video image quality as close as possible to that offered by original Arcade monitors. Enjoy the closest experience to the original and get the most out of your classic arcade games. 

In order to be able to install and configure this cable, you will need the VGA arcade card or an ATI type card along with the Arcade VGA cable and configure some software settings so that the PC video image outputs CGA 15Khz. 

We have also included a MOLEX connector with 5V and 12V connections that will allow your CRT TV to turn on automatically and switch to RGB / AV channel without the need of a remote control. This cable also provides audio thanks to the mini-jack cable attached to it. (Connecting the MOLEX to a PC or Power Supply is necessary otherwise you won't get a stable video image.)

This cable is manufactured by Arcade Express with top quality components. All lovers of retrogaming in general will be able to enjoy their games again as originally intended.

PLEASE NOTE: The TV turning on automatically is not a standard feature. It depends entirely on the TV manufacturer options. Not all televisions turn on when they receive the signal from the cable. This doesn't depend on our cable.

Features

• 100% Manufactured in Europe by Arcadexpress
• ArcadeVga to Scart cable to broadcast RGB Pixel Perfect
• Molex connector with 5V + 12V  voltage
• Compatible with PC / Rasbperry Pi 
• Auto power on and change channel to AV / RGB for CRT TV
• Requires video output of 15khz CGA
• Audio cable included
• 150cm cable
• Not compatible with multigame boards such as Pandora's Box, Game Elf, etc. since they output 30Khz video